Siemens SIMATIC ET 200AL System Manual page 124

Accessories/spare parts
C.2 Cables
The following table shows the technical properties of the connecting cable for ET-Connection
standard.
Table C- 10
General information
Product type designation
Function
Degree of protection and protection class
IP65
IP67
Ambient conditions
Ambient temperature during mounting
minimum
maximum
Storage/transport temperature
Ambient temperature during transport and storage
minimum
maximum
Cables
Cable designation
Number of electrical wires
Design of shielding
Cable length
Outside diameter of the inner conductor
Outside diameter of the wire insulation
Outside diameter of the cable sheath
Permissible bending radius
One time bending, min.
Multiple bending, min.
Constant bending
Color of the cable sheath
Color of the wire insulation of the data wires
Weight per length
Mechanics/material
Type of cable outlet
Connector housing material
Wire insulation material
Cable sheath material
Material property halogen free
Material property silicon free
122
Connecting cables for ET-Connection
CONNECTING CABLE FOR BUS CABLE ET-
CONNECTION, CABLE 0.2 M
To connect two bus cables ET-CONNECTION
Yes
Yes
-30 °C
80 °C
-40 °C
80 °C
2Y(ST)CY 1x4x0.5/1.0-100-GN
4
Overlapped aluminum-lined sheet, coated with
shielding made of tin plated copper wires
0.2 m
0.5 mm
1.0 mm
5 mm
20 mm
40 mm
100 mm
Green
White, yellow, blue, orange
34 kg/km
180° cable outlet
Metal
PE
PVC
No
Yes
System Manual, 08/2021, A5E31861578-AJ
Distributed I/O system