Siemens SIMATIC ET 200AL System Manual page 104

Technical specifications
10.1 Standards and authorizations
Korea Certificate KCC-REM-S49-ET200
Please note that this device corresponds to limit class A with regard to the emission of radio
interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며
가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Marking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU)
IEC 61131-2
The ET 200AL distributed I/O system fulfills the requirements and criteria of standard
IEC 61131-2 (programmable logic controllers, Part 2: Equipment requirements and tests).
IEC 61010-2-201
The ET 200AL distributed I/O system fulfills the requirements and criteria of standard
IEC 61010-2-201.
PROFINET standard
The interface module IM 157-1 PN based on standard IEC 61158 Type 10.
PROFIBUS standard
The interface module IM 157-1 DP based on standard IEC 61158 Type 3.
Marine approval
Classification societies:
• ABS (American Bureau of Shipping)
• BV (Bureau Veritas)
• CCS (China Classification Society)
• Class NK (Nippon Kaiji Kyokai)
• DNV-GL (Det Norske Veritas - Germanischer Lloyd)
• LRS (Lloyds Register of Shipping)
Note
The fail-safe module F DI 4+F DQ 2x24VDC/2A, 4xM12 of the ET 200AL distributed I/O system
does not support the specified marine approvals due to the increased supply voltage
requirements.
102
Distributed I/O system
System Manual, 08/2021, A5E31861578-AJ