Siemens SIMATIC ET 200AL System Manual page 444

Article number
Encoder supply
Number of outputs
24 V encoder supply
• Short-circuit protection
• Output current, max.
Power loss
Power loss, typ.
Digital inputs
Number of digital inputs
Input characteristic curve in accordance with
IEC 61131, type 3
Number of simultaneously controllable inputs
all mounting positions
–
up to 55 °C, max.
Input voltage
• Rated value (DC)
• for signal "0"
• for signal "1"
Input current
• for signal "1", typ.
Input delay (for rated value of input voltage)
for standard inputs
–
at "0" to "1", min.
–
at "0" to "1", max.
–
at "1" to "0", min.
–
at "1" to "0", max.
Cable length
• unshielded, max.
Digital outputs
Number of digital outputs
• in groups of
Short-circuit protection
• Response threshold, typ.
Limitation of inductive shutdown voltage to
Switching capacity of the outputs
• on lamp load, max.
Load resistance range
• lower limit
• upper limit
Digital input/digital output module DIQ 4+DQ 4x24VDC/0.5A 8xM8 (6ES7143-5BF00-0BA0)
Equipment Manual, 08/2021, A5E32349882-AD
6ES7143-5BF00-0BA0
4
Yes; per module, electronic
0.7 A; Total current of all encoders
2.5 W
4; Parameterizable as DIQ
Yes
4
24 V
-3 to +5V
+11 to +30V
3.2 mA
1.2 ms
4.8 ms
1.2 ms
4.8 ms
30 m
8; 4 DQ fixed, 4 DIQ parameterizable
4; 2 load groups for 4 outputs each
Yes; per channel, electronic
0.7 A
2L+ (-47 V)
5 W
48 Ω
4 kΩ
Technical specifications
25