Siemens SIMATIC ET 200AL System Manual page 198

IEC 61131-2
The ET 200AL IO-Link I/O modules fulfill the requirements and criteria of IEC 61131-2.
IEC 61131-9
The ET 200AL IO-Link I/O modules fulfill the requirements and criteria of the IO-Link standard
IEC 61131-9.
Marine approval
Classification societies:
• ABS (American Bureau of Shipping), coming soon
• BV (Bureau Veritas),
• CCS (China Classification Society), coming soon
• Class NK (Nippon Kaiji Kyokai), coming soon
• DNV-GL (Det Norske Veritas - Germanischer Lloyd), coming soon
• LRS (Lloyds Register of Shipping), coming soon
Industrial use
The ET 200AL IO-Link I/O modules are designed for the industrial environment. The following
standards are met for this:
• Requirements for interference emission EN 61000-6-4
• Requirements for immunity EN 61000-6-2
Use in mixed areas
Under certain circumstances, you can use the ET 200AL IO-Link I/O modules in a mixed area.
A mixed area is used for residential purposes and for commercial operations that do not
significantly impact the residential purpose.
If you want to use the ET 200AL IO-Link I/O modules in a mixed area, you must ensure that its
radio frequency interference emissions comply with the limits of EN 61000-6-3. Suitable
measures for observing these limits for use in a mixed area are, for example:
• Use of filters in supply cables
An additional individual acceptance test is also required.
Use in residential areas
Note
ET 200AL IO-Link I/O modules are not intended for use in residential areas
The ET 200AL IO-Link I/O modules are not intended for use in residential areas. Using the
ET 200AL IO-Link I/O modules in residential areas can affect radio and television reception.
Reference
The certificates for the markings and approvals can be found on the Internet under
Service&Support (http://www.siemens.com/automation/service&support).
IO-Link I/O modules
System Manual, 08/2021, A5E48755395-AB
Technical specifications
9.1 Standards and authorizations
55