Siemens SIMATIC ET 200AL System Manual page 126

Accessories/spare parts
C.2 Cables
Cables of power supply standard and PUR cable
The cables for the power supply are available in the following versions and lengths:
• Power cable (4-wire), pre-assembled on both sides with a 4-pole M8 pin connector/socket
connector
– available lengths: 0.19 m, 0.3 m, 1 m, 2 m, 5 m, 10 m, 15 m
• Power cable (4-wire), pre-assembled on both sides with a 4-pole M8 pin connector/socket
connector, angled
– available lengths: 0.3 m, 1 m, 2 m, 5 m, 10 m, 15 m
• Power cable (4-wire), pre-assembled on one side with 1x M8 socket connector
– available lengths: 2 m, 5 m, 10 m, 15 m
The following table shows the technical properties of the power supply cable, standard.
Table C- 12
General information
Product type designation
Function
Degree of protection and protection class
IP65
IP67
Ambient conditions
Ambient temperature during mounting
minimum
maximum
Storage/transport temperature
Ambient temperature during transport and storage
minimum
maximum
Cables
Cable designation
Number of electrical wires
Outside diameter of the inner conductor
Outside diameter of the wire insulation
Outside diameter of the cable sheath
Number of bending cycles
Permissible bending radius
One time bending, min.
Multiple bending, min.
Constant bending
Color of the cable sheath
Color of the wire insulation of the power wires
Weight per length
124
Cables for power supply
POWER CABLE M8
For connection of ET 200AL for 24 V DC power
supply
Yes
Yes
-30 °C
80 °C
-40 °C
80 °C
4 Li9Y 0.50 mm² Y
4
0.8 mm
1.46 mm
5.2 mm
2500000; Trailing-chain suitable for 2.5 million
bending cycles with a bending radius of 52 mm, a
speed of 3 m/s² and an acceleration of 10 m/s²
26 mm
52 mm
52 mm
Gray
White, brown, blue black
44 kg/km
System Manual, 08/2021, A5E31861578-AJ
Distributed I/O system