Siemens SIMATIC ET 200AL System Manual page 461

Product overview
2.1 Properties
Properties
The module has the following technical properties:
• 4 digital inputs or digital outputs and 4 digital outputs, depending on parameter
assignment
– DIQ signals connected to 1L+ (non-switched)
– DQ signals connected to 2L+ (switched)
• M12 sockets for connection of sensors and actuators
• Digital inputs:
– 24 V DC supply voltage
– Configurable diagnostics can be set for each module
– Typical input delay of 3 ms
– Suitable for switches and proximity switches
• Digital outputs:
– Rated load voltage 24 V DC
– Suitable for solenoid valves, DC contactors, and indicator lights
– Output current per output 0.5 A
– Configurable diagnostics can be set for each module
• Dimensions 30 x 159 mm
The module supports the following functions:
• Firmware update
• Identification and maintenance data I&M0 to I&M3
• Value status (Quality Information)
• PROFIenergy
Accessories
The following components are included in the module package:
• Identification labels
• Spacers
10
Digital input/digital output module DIQ 4+DQ 4x24VDC/0.5A 4xM12 (6ES7143-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36683613-AB