Siemens SIMATIC ET 200AL System Manual page 312

Product overview
2.3 Functions
Procedure
To configure PROFIenergy, follow these steps:
1. Create the parameter data record, Index 3, in STEP 7.
2. Transfer the parameter data record to the interface module with the instruction
"WRREC" - SFB 53.
3. Create the user program with the FBs to control the PROFIenergy commands
("PE_START_END" - FB 815, "PE_CMD" - FB 816).
4. Transfer the user program to the CPU.
Additional information
You will find more information on the Internet (http://www.profibus.com) under Common
Application Profile PROFIenergy; Technical Specification for PROFINET; as well as in the
following documentation:
• System manual ET 200AL Distributed I/O System
(https://support.industry.siemens.com/cs/ww/en/view/89254965)
• Device manuals I/O modules
(https://support.industry.siemens.com/cs/ww/en/ps/14247/man)
• System manual PROFINET System Description
(https://support.industry.siemens.com/cs/ww/en/view/19292127)
• PROFINET with STEP 7 V14
(https://support.industry.siemens.com/cs/ww/en/view/49948856), function manual,
section: Saving energy with PROFIenergy
• Application guide for implementation of shutdown concepts with PROFIenergy.
(https://support.industry.siemens.com/cs/ww/en/view/96837137)
• Saving energy with SIMATIC S7 (STEP 7 as of V5.5)
(https://support.industry.siemens.com/cs/ww/en/view/41986454)
• Saving energy with SIMATIC S7 and SIMATIC HMI (TIA Portal)
(https://support.industry.siemens.com/cs/ww/en/view/58235225)
• SIMATIC S7 library for simple configuration of PROFIenergy.
(https://support.industry.siemens.com/cs/ww/en/view/109478388)
• You will find additional information on the PROFIenergy FBs ("PE_START_END" - FB 815,
"PE_CMD" - FB 816) in the online help for STEP 7 V5.5 SP2 and higher on System
functions/system function blocks.
16
IM 157-1 PN (6ES7157-1AB00-0AB0)
Equipment Manual, 05/2021, A5E32347036-AE