Siemens SIMATIC ET 200AL System Manual page 103

UL approval
Underwriters Laboratories Inc. in accordance with
• UL 61010-1 and UL 61010-2-201
• CSA C22.2 No. 61010-1 and CSA C22.2 No. 61010-2-201 (Process Control Equipment)
The following table shows the modules that are approved for UL50/NEMA250 Enclosure Type
4X Indoor use only, watertight.
Table 10- 1
Description
Interface modules ET 200AL
IM157-1 PN interface module
IM 157-1 DP interface module
DI
DI 8x24VDC, 8xM8
DI 8x24VDC, 4xM12
DI 16x24VDC, 8xM12
DQ
DQ 8x24VDC/2A, 8xM12
DI/DQ
DIQ 4+DQ 4x24VDC/0,5A, 8xM8
DIQ 4+DQ 4x24VDC/0,5A, 4xM12
DIQ 16x24VDC/0,5A, 8xM12
AI
AI 4xU/I/RTD, 4xM12
AQ
AQ 4xU/I, 4xM12
Communication modules
CM 4xIO-LINK, 4xM12
The following table shows the modules that are approved for UL50/NEMA250 Enclosure
Type 1.
Table 10- 2
Description
DI/DQ
F-DI 4+F-DQ 2x24VDC/2A, 4xM12
RCM Declaration of conformity for Australia/New Zealand
The ET 200AL distributed I/O system meets the requirements of EN 61000-6-4:2007 Generic
standards – Emission standard for industrial environments.
Distributed I/O system
System Manual, 08/2021, A5E31861578-AJ
Released modules according to UL50/NEMA250 Enclosure Type 4X, Indoor use only, wa-
tertight
Released modules according to UL50/NEMA250 Enclosure Type 1
Technical specifications
10.1 Standards and authorizations
Article number
6ES7157-1AB00-0AB0
6ES7157-1AA00-0AB0
6ES7141-5BF00-0BA0
6ES7141-5AF00-0BA0
6ES7141-5AH00-0BA0
6ES7142-5AF00-0BA0
6ES7143-5BF00-0BA0
6ES7143-5AF00-0BA0
6ES7143-5AH00-0BA0
6ES7144-5KD00-0BA0
6ES7145-5ND00-0BA0
6ES7147-5JD00-0BA0
Article number
6ES7146-5FF00-0BA0
101