Siemens SIMATIC ET 200AL System Manual page 463

Product overview
2.2 Operator controls and display elements
2.2 Operator controls and display elements
The figure below shows the operator controls and display elements of the
DIQ 4+DQ 4x24VDC/0.5A 4xM12 digital input/digital output module.
①
②
③
④
⑤
⑥
⑦
⑧
Figure 2-2
12
DIAG: LED display for the diagnostic status
X10 to X13: Sockets for the input/output signal
PWR: LED display for load voltage 2L+
X80: Connector for infeed of the supply voltage (POWER input)
X81: Socket for loop-through of the supply voltage (POWER output)
X30: Socket for ET-Connection IN
X31: Socket for ET-Connection OUT
LED displays 0 to 7 for the channel status
Operator controls and display elements
Digital input/digital output module DIQ 4+DQ 4x24VDC/0.5A 4xM12 (6ES7143-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36683613-AB