Siemens SIMATIC ET 200AL System Manual page 291

Technical specifications
Technical specifications of the interface module IM 157-1 DP
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7157-1AA00-0AB0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Vendor identification (VendorID)
Product function
• I&M data
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
• STEP 7 configurable/integrated from ver-
sion
• PROFIBUS from GSD version/GSD revision
Configuration control
via dataset
Supply voltage
Load voltage 1L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
Power loss
Power loss, typ.
Address area
Address space per station
• Address space per station, max.
Interfaces
Number of PROFIBUS interfaces
IM 157-1 DP (6ES7157-1AA00-0AB0)
Equipment Manual, 08/2021, A5E32100641-AE
6ES7157-1AA00-0AB0
IM 157-1 DP
FS02
V1.0.x
81A9H
Yes; I&M0 to I&M3
STEP 7 V13 SP1 or higher
From V5.5 SP4 Hotfix 3
GSD as of Revision 5
Yes
24 V
20.4 V
28.8 V
Yes; against destruction
50 mA
4 A; Maximum value
4 A; Maximum value
1.7 W
244 byte
1
6
41