Siemens SIMATIC ET 200AL System Manual page 184

5.6.2 Optional markings
Introduction
In addition to the factory markings, there are also optional possibilities for labeling or
marking interfaces and modules on the IO-Link I/O modules.
Identification label
The identification labels come with each IO-Link I/O module as strips and can be machine-
printed. A strip has 10 identification labels measuring 10 x 5 mm in the color RAL9016. The
identification labels can be inserted into every module at the points provided. The
identification labels are used for channel and module labeling.
The figure below shows all points where you can use the identification labels using the
example of the IO-Link digital input module module DI 8x24VDC 8xM8.
①
Figure 5-9
IO-Link I/O modules
System Manual, 08/2021, A5E48755395-AB
Identification labels
Optional marking
5.6 Marking of IO-Link I/O modules
Connecting
41