Siemens SIMATIC ET 200AL System Manual page 6

Preface
Special information
Note
Important note for maintaining operational safety of your plant
Plants with safety-related features are subject to special operational safety requirements on
the part of the operator. The supplier is also obliged to comply with special product
monitoring measures. For this reason, we inform you in personal notifications about product
developments and features that are (or could be) relevant to the operation of systems from a
safety perspective.
You should subscribe to the corresponding notifications in order to obtain the latest
information and to allow you to make any necessary modifications to your system.
Log on to Industry Online Support. Follow the links below and click on "Email on update" on
the right-hand side in each case:
• SIMATIC S7-300/S7-300F (https://support.industry.siemens.com/cs/ww/en/ps/13751)
• SIMATIC S7-400/S7-400H/S7-400F/FH
(https://support.industry.siemens.com/cs/ww/en/ps/13828)
• SIMATIC WinAC RTX (F) (https://support.industry.siemens.com/cs/ww/en/ps/13915)
• SIMATIC S7-1500/SIMATIC S7-1500F
(https://support.industry.siemens.com/cs/ww/en/ps/13716)
• SIMATIC S7-1200/SIMATIC S7-1200F
(https://support.industry.siemens.com/cs/ww/en/ps/13683)
• Distributed I/O (https://support.industry.siemens.com/cs/ww/en/ps/14029)
• STEP 7 (TIA Portal) (https://support.industry.siemens.com/cs/ww/en/ps/14667)
Note
When using F-CPUs in safety mode and fail-safe modules, observe the description of the
SIMATIC Industrial Software SIMATIC Safety - Configuring and Programming
(https://support.industry.siemens.com/cs/ww/de/view/54110126/en) fail-safe system.
Recycling and disposal
For ecologically sustainable recycling and disposal of your old device, contact a certificated
disposal service for electronic scrap and dispose of the device in accordance with the
regulations in your country.
Additional support
• Information about Technical Support is available in section Siemens Industry Online
Support (Page 5).
• The range of technical documentation for the individual SIMATIC products and systems
can be found on the Internet (https://www.siemens.com/simatic-tech-doku-portal).
• Information about the online catalog and online order system is available in section
Industry Mall (Page 6).
4
Distributed I/O system
System Manual, 08/2021, A5E31861578-AJ