Siemens SIMATIC ET 200AL System Manual page 414

Technical specifications
6.1 Technical specifications
Article number
Power loss
Power loss, typ.
Digital inputs
Number of digital inputs
Input characteristic curve in accordance with
IEC 61131, type 3
Number of simultaneously controllable inputs
all mounting positions
–
up to 55 °C, max.
Input voltage
• Rated value (DC)
• for signal "0"
• for signal "1"
Input current
• for signal "1", typ.
Input delay (for rated value of input voltage)
for standard inputs
–
at "0" to "1", min.
–
at "0" to "1", max.
–
at "1" to "0", min.
–
at "1" to "0", max.
Cable length
• unshielded, max.
Encoder
Connectable encoders
• 2-wire sensor
–
permissible quiescent current (2-wire
sensor), max.
Interrupts/diagnostics/status information
Alarms
• Diagnostic alarm
Diagnoses
• Short-circuit
Diagnostics indication LED
• Channel status display
• for module diagnostics
Potential separation
between the load voltages
22
6ES7141-5AH00-0BA0
2.7 W
16
Yes
16
24 V
-30 to +5 V
+11 to +30V
3.2 mA
1.2 ms
4.8 ms
1.2 ms
4.8 ms
30 m
Yes
1.5 mA
Yes; Parameterizable
Yes; Sensor supply to M; module by module
Yes; green LED
Yes; green/red LED
Yes
DI 16x24VDC 8xM12 (6ES7141-5AH00-0BA0)
Equipment Manual, 08/2021, A5E36681813-AB