Siemens SIMATIC ET 200AL System Manual page 358

Technical specifications
Technical specifications of the DI 8x24VDC 8xM8 digital input module
The following table shows the technical specifications as of the issue date. You can find a
data sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7141-5BF00-0BA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
Product function
• I&M data
Engineering with
• STEP 7 TIA Portal configurable/integrated
from version
• STEP 7 configurable/integrated from ver-
sion
• PROFIBUS from GSD version/GSD revision
• PROFINET from GSD version/GSD revision
Supply voltage
Load voltage 1L+
• Rated value (DC)
• permissible range, lower limit (DC)
• permissible range, upper limit (DC)
• Reverse polarity protection
Input current
Current consumption (rated value)
from load voltage 1L+ (unswitched voltage)
from load voltage 2L+, max.
Encoder supply
Number of outputs
24 V encoder supply
• Short-circuit protection
• Output current, max.
Power loss
Power loss, typ.
DI 8x24VDC 8xM8 (6ES7141-5BF00-0BA0)
Equipment Manual, 08/2021, A5E32349579-AD
6ES7141-5BF00-0BA0
DI 8x24VDC
FS03
V1.0.x
Yes; I&M0 to I&M3
STEP 7 V13 SP1 or higher
From V5.5 SP4 Hotfix 3
GSD as of Revision 5
GSDML V2.3.1
24 V
20.4 V
28.8 V
Yes; Against destruction; encoder power supply
outputs applied with reversed polarity
25 mA; without load
4 A; Maximum value
4 A; Maximum value
8
Yes; per module, electronic
0.7 A; Total current of all encoders
1.9 W
6
21