Siemens SIMATIC ET 200AL System Manual page 236

Application planning
Requirement
The following components support mixed configuration:
• Interface module
– IM 155-6 PN HF (V3.0 or higher)
– IM 155-6 PN/2 HF
– IM 155-6 PN/3 HF
– IM 155-6 PN ST (V3.1 or higher)
– IM 155-6 DP HF (V3.0 or higher)
– IM 155-6 MF HF
• CPU
– CPU 1510SP-1 PN (V2.0 or higher)
– CPU 1510SP F-1 PN (V2.0 or higher)
– CPU 1512SP-1 PN (V2.0 or higher)
– CPU 1512SP F-1 PN (V2.0 or higher)
– CPU 1515SP PC
– CPU 1515SP PC F
– CPU 1515SP PC T
– CPU 1515SP PC2
– CPU 1515SP PC2 F
– CPU 1515SP PC2 T
– CPU 1515SP PC2 TF
• BaseUnit BU-Send with BusAdapter BA-Send 1xFC
• ET-Connection cable
• Power cable
18
Mixed configuration
Equipment Manual, 11/2020, A5E33344611-AD