Siemens SIMATIC ET 200AL System Manual page 496

2.2 Operator controls and display elements
The following figure shows the operator controls and display elements of the digital
input/digital output module DIQ 16x24VDC/0.5A 8xM12.
①
②
③
④
⑤
⑥
⑦
⑧
Figure 2-2
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
Equipment Manual, 08/2021, A5E38688112-AD
DIAG: LED display for the diagnostic status
X10 to X17: Sockets for the input/output signal
PWR: LED display for load voltage 2L+
X80: Connector for infeed of the supply voltage (POWER input)
X81: Socket for loop-through of the supply voltage (POWER output)
X30: Socket for ET-Connection IN
X31: Socket for ET-Connection OUT
LED displays 0 to 15 for the channel status
Operator controls and display elements
2.2 Operator controls and display elements
Product overview
13