Siemens SIMATIC ET 200AL System Manual page 376

2.2 Operator controls and display elements
The figure below shows the operator controls and display elements of the DI 8x24VDC 4xM12
digital input module.
①
②
③
④
⑤
⑥
⑦
Figure 2-2
DI 8x24VDC 4xM12 (6ES7141-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36680963-AB
DIAG: LED display for the diagnostic status
X10 to X13: Sockets for the input signal
X80: Connector for infeed of the supply voltage (POWER input)
X81: Socket for loop-through of the supply voltage (POWER output)
X30: Socket for ET-Connection IN
X31: Socket for ET-Connection OUT
LED displays 0 to 7 for the channel status
Operator controls and display elements
2.2 Operator controls and display elements
Product overview
11