Honda XL200 2001 Shop Manual page 57

FUEL SYSTEM
Install the O-ring into the groove in the carburetor body.
Install the float chamber aligning the overflow tube on the
chamber with the hole in the baffle plate as shown.
Install and tighten the float chamber screws.
Install the accelerator diaphragm and dust boot.
Install the diaphragm spring and cover.
Tighten the cover screws.
4 -1 0
XL2 0 0
O-RING
FLOAT CHAMBER
SCREWS
BOOT
DIAPHRAGM
SCREWS
SPRING