CLUTCH/GEARSHIFT LINKAGE
Stake the lock nut against the mainshaft groove.
Install the clutch springs and lifter plate, and tighten the bolts in
a crisscross pattern in 2-3 steps.
Install the clutch lifter guide.
Clean the oil filter rotor.
Check the oil through pipe operates freely, without binding.
If necessary, remove the B-clip and replace faulty part.
8 -8
BOLT
BOLT
LIFTER PLATE
CLUTCH CENTER LOCK NUT
LIFTER GUIDE
OIL FILTER ROTOR
XL2 0 0
STAKE