ALTERNATOR/STARTER CLUTCH
STARTER CLUTCH INSPECTION/DISASSEMBLY
Check for an inoperable one-way clutch.
The driven gear should turn counterclockwise smoothly, but
should not turn clockwise.
Inspect the starter driven gear teeth for damage or abnormal
wear.
Hold the flywheel using the flywheel holder, then remove the one-
way clutch from the flywheel by removing three starter clutch
bolts.
Check the one-way clutch rollers for wear or damage.
9 -6
DRIVEN GEAR
DRIVEN GEAR
FLYWHEEL
BOLTS
ONE-WAY CLUTCH
XL2 0 0