XL2 0 0
ALTERNATOR/STARTER CLUTCH
PULSE GENERATOR
ALTERNATOR/PULSE GENERATOR REPLACEMENT
Remove the bolts and pulse generator from the case cover; but
not disconnect pulse generator wire connector yet.
BOLTS
CLAMP
PULSE GENERATOR
Release the pulse generator wire from the clamp on the pulse
generator.
Disconnect the pulse generator wire connector from the pulse
generator.
NOTE
• Pull the connector, do not pull the wire.
WIRE
CLAMP
Remove the wire clamp, the starter mounting bolts and the
stator.
STATOR
BOLT
Install the stator into the left crankcase cover.
Insert the wire grommet into the groove in the left crankcase
cover.
Apply a locking agent to the threads of the stator bolt threads.
Install and tighten the bolts securely.
9 -3