FRONT WHEEL/SUSPENSION/STEERING
Connect the front brake switch connectors.
Install the knuckle guard and rearview mirror.
Install the left handlebar switch housing aligning its locating pin
with the hole on the handlebar.
Install the screws and tighten the forward screw first, then the
rear screw.
Install the clutch lever bracket.
Install the screws and tighten the forward screw first, then the
rear screw.
Connect the clutch switch wire connectors.
Install the wire bands.
1 1 -6
CONNECTORS
HOLE
PIN
CLUTCH LEVER BRACKET
WIRE BANDS
REARVIEW MIRROR
XL2 0 0
SCREWS
SCREWS