Crankcase Separation - Honda XL200 2001 Shop Manual

XL2 0 0

CRANKCASE SEPARATION

Remove the right crankcase cover bolt and clutch cable holder.
Remove the cam chain and the left crankcase bolts.
NOTE
• Loosen the bolts in a crisscross pattern in 2-3 steps.
Place the left crankcase down and remove the right crankcase.
NOTE
• Separate the right and left crankcase from each other by
tapping them at several locations with a soft hammer.
h
• Do not pry the crankcase halves apart with a screw-driver.
Remove the gasket and dowel pins.
CRANKSHAFT/TRANSMISSION
CABLE HOLDER
BOLT
RIGHT CRANKCASE
GASKET
BOLT
1 0 -3