Valve Seat Grinding - Honda XL200 2001 Shop Manual

XL2 0 0

VALVE SEAT GRINDING

Honda Valve Seat Cutters, a grinder or equivalent valve seat
refacing equipament are recommended to correct a worn valve
seat.
NOTE
• Follow the refacer manufacturer's operating instructions.
Use a 45 degree cutter to remove ant roughness or irregularities
from the seat.
NOTE
• Reface the valve seat with a 45 degree cutter when a valve
guide is replaced.
Using 32 degree cutter, remove 1/4 of the exiting valve seat
material.
CYLINDER HEAD/VALVES
VALVE GUIDE REAMER
6 -1 1