Lubrication - Honda XL200 2001 Shop Manual

XL2 0 0
SERVICE INFORMATION
TROUBLESHOOTING
ENGINE OIL LEVEL CHECK
SERVICE INFORMATION
GENERAL
t
• If engine must be running to do some work, make sure the area is well ventilated. Never run the engine in an enclosed
area. The exhaust contains poisonous carbon monoxide gas that can cause loss of conciousness and may lead to death.
Run the engine in an open area or with an exhaust evacuation system in an eclosed area.
• Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged periods. Although this is
unlikely unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and water
as soon as possible after handling used oil.
This section describes how to inspect and replace the engine oil and clean the oil filter screen.
SPECIFICATIONS
Engine oil
Oil capacity
Recommended oil
Oil pump
ITEM
Oil pump Outer rotor-to-body clearance
Rotor tip clearance
End clearance
TORQUE VALUES
Oil filter screen plug
Oil pump cover screw

2. LUBRICATION

2-1 ENGINE OIL CHANGE/OIL FILTER SCREEN
2-2 ENGINE OIL FILTER ROTOR
2-3 OIL PUMP
1.1 liter (1.16 US qt, 0.97 lmp. qt) at draining
1.4 liter (1.5 US qt, 1,2 lmp. qt) at disassembly
Mobil Super Moto 4T SF
SAE 20W-50 API-SF
STANDARD
0.15-0.21 (0.006-0.008)
0.15 (0.006)
0.02-0.10 (0.001-0.004)
15 N.m (1.5 Kg.m, 11 ft-lb)
3 N.m (0.30 Kg.m, 2.2 ft-lb)
2-3
2-4
2-5
2
UNIT: mm (in)
SERVICE LIMIT
0.25 (0.010)
0.20 (0.008)
0.15 (0.006)
2 -1