Honda XL200 2001 Shop Manual page 189

REAR WHEEL/SUSPENSION
Install the drive chain cover onto the swingarm, aligning its cut-
out with the hook on the swingarm.
Temporarily install the shock absorber lower mounting bolt/nut
and shock link-to-swingarm bolt/nut.
Install and tighten the mounting bolts.
TORQUE: 45 N.m (4.5 kg.m, 32 ft-lb)
Install the rear wheel.
DUST SEAL CAP
PIVOT COLLAR
1 2 -1 8
SWINGARM
HOOK
LOWER MOUNTING BOLT
SHOCK LINK BOLT/NUT
DRIVE CHAIN SLIDER
XL2 0 0
DRIVE CHAIN COVER
DRIVE CHAIN GUARD
BOLTS
SCREW