Oil Pump Installation - Honda XL200 2001 Shop Manual

XL2 0 0 LUBRICATION
Install the rotor shaft and pump gear into the pump body.
Install the gear cover.
GASKET PUMP COVER
Install the outer and inner rotors.
Install the gasket and pump cover.
NOTE
• Align the boss on the cover with the groove in the pump
body.
Install and tighten the screws.
TORQUE: 3 N.m (0.30 kg.m. 2.2 ft-lb)
Check for smooth operation of the oil pump.
INSTALLATION
Install new O-rings into the crankcase.
O-RINGS
SCREWS
Install the oil pump and tighten the screws.
Install the right crankcase cover.
OIL PUMP
2 -7