Honda XL200 2001 Shop Manual page 59

FUEL SYSTEM
Install the throttle link aligning the cut-out of the link to the cut-out
on the throttle drum.
Install the washer and nut, then tighten the nut securely.
Install and tighten the link arm screw.
Install the spring as shown.
Check the linkage operation as follow:
– Open the throttle slightly by pressing on the throttle drum. Then
release the throttle.
Make sure that there is no drag.
4 -1 2
THROTTLE LINK
SCREW
NUT/WASHER
SPRING
THROTTLE DRUM
XL2 0 0