8.4 Winding on the hook thread
Steps
1. Place the bobbin (2) on the winder shaft.
2. Thread the hook thread as illustrated.
3. Wind the hook thread clockwise onto the bobbin.
4. Swivel the bobbin case flap (1) against the bobbin.
5. Switch on the main switch.
6. Start sewing.
7. After reaching the set bobbin fill quantity, the bobbin winder
8. Remove the full bobbin, clamp the thread under blade (3) and
18
CAUTION!
Damage to machine possible due to winding without sew-
ing.
Winding on without sewing can cause damage to the sewing
feet and bobbin case in the hook.
Enable winding on mode ( Chap. 9.4, p. 29) if you need to
Fig. 6: Winding on the hook thread
1
2
(1) - Bobbin case flap
(2) - Bobbin
switches off automatically ( Service Manual Chap. 16.1).
cut.
3
(3) - Blade
Instruction manual 650-16 Version 00.0 - 07/2013
Operation