Table of Contents
Advertisement
28
For machines with thread cutter
20. Pull the thread through the needle eye until the loose thread
end has a length of approx. 4 cm with the thread lever (16) at
the highest position.
Important:
Check the thread length.
If the loose thread end is too long, the thread may be caught by
the hook and cause a disturbance. If the loose thread end is too
short, the machine cannot start sewing.
4.6
Winding the hook thread
WARNING
Risk of injury from needle tip and moving parts!
Puncture, cutting and crushing possible.
Turn off the machine before threading the thread.
Fig. 9: Winding the hook thread (1)
(1) - Thread guide
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
①
(2) - Hose guide
Operation
②
Advertisement
Table of Contents
