Lan Isolation Box And Holder Replacement Procedure - GE Vivid q N Service Manual

GE
D FQ091019, R
IRECTION
8-4-13

LAN Isolation Box and Holder Replacement Procedure

8-4-13-1 Tools
Appropriate Phillips screw driver.
8-4-13-2 LAN Isolation Box and Holder Removal Procedure
1) Disconnect the LAN communication cable.
2.) From below the Top Shelf, remove the two LAN Holder retaining screws (see
remove the LAN Holder.
Figure 8-103 LAN Holder and Isolation Box
Retaining Screws located behind
LAN Isolation Box
3.) Remove the LAN Isolation Box.
8-4-13-3 LAN Isolation Box and Holder Installation Procedure
1) Position the LAN Isolation Box in the LAN Holder and replace the LAN Holder with the Isolation Box
in their appropriate location beneath the Top Shelf.
2.) Return and tighten the two retaining screws to secure the LAN Holder.
3) Connect the LAN communication cable.
8-88
2
EVISION
LAN Holder
Section 8-4 - SafeLock Cart Components Replacement
V N S
IVID Q
Figure
LAN Communication Cable
LAN Holder
M
ERVICE ANUAL
8-103) and