Mounting The Vivid Q N On The Safelock Cart (Optional); Mounting The Vivid Q N On The Safelock Cart - GE Vivid q N Service Manual

GE
D FQ091019, R
IRECTION
Section 3-8

Mounting the Vivid q N on the SafeLock Cart (optional)

NOTE: The Vivid q N portable ultrasound scanner may be mounted on the SafeLock Cart while power
to the system is either ON or OFF. When mounting the unit on the cart, it may be necessary to
adjust the locking mechanism, as described in
Mechanism" on page
Only the SafeLock Cart supplied by GE and/or any medical-grade cart which has been approved as
NOTICE
suitable for use with the system by GE should be used with the Vivid q N portable ultrasound scanner.
The Vivid q N system and the SafeLock Cart should be operated at a distance of more than 15 feet from
NOTICE
any magnetic field.
When scanning with the Vivid q N portable ultrasound scanner mounted on the SafeLock Cart, the
NOTICE
Vivid q N should be connected to the Cart via the USB port.
3-8-1

Mounting the Vivid q N on the SafeLock Cart

Before mounting the Vivid q N portable ultrasound scanner on the SafeLock Cart make
WARNING WARNING
sure there are no foreign objects on the main shelf surface or in front of the locking
tooth.
1.) Working from the front of the SafeLock Cart, place the Vivid q N scanner flat down on the main shelf
(towards the front) then slide it backwards between the sliding guides on either side of the shelf, as
shown below.
Figure 3-62 Placing the Vivid q N on the SafeLock Cart Main Shelf
2
EVISION
3-68.
Chapter 3 - System Setup
3-8-2 "Adjusting the SafeLock Cart Locking
Sliding Guides
V N S M
IVID Q ERVICE ANUAL
3-65