GE
D
FQ091019, R
IRECTION
1-9-4
General Caution
Any changes to accessories, peripheral units or any other part of the system must be approved
CAUTION
by the manufacturer. Ignoring this advice may compromise the regulatory approvals obtained
for the product.
NOTE:
For CE Compliance, it is critical that all covers, screws, shielding, gaskets, mesh and clamps
are in good condition and installed tightly without skew or stress. Proper installation following
all comments noted in this service manual is required in order to achieve full EMC performance.
2
EVISION
Chapter 1 - Introduction
V
N S
M
IVID Q
ERVICE
ANUAL
1-25