Replacement Of The Cable Holder - GE Voluson E Series Service Manual

Hide thumbs Also See for Voluson E Series:

Table of Contents

8.9 Replacement of the Cable Holder

One person, 3 minutes

Phillips screwdriver PH1 and PH2

8.9.1 Cable Holder - Removal Procedure

Loosen 2 screws below the control console and then remove the Cable Holder.

8.9.2 Cable Holder - Installation Procedure

Place the new Cable Holder at its original position and fasten it with 2 screws.

Voluson E-Series Service Manual

KTD106657 Revision 2

Figure 8-23 loosen 2 screws and remove cable holder

Replacement Procedures

Table of Contents