GE Vivid q N Service Manual page 645

GE
D FQ091019, R
IRECTION
Figure 8-149 Changing the Name
6.) When done, click somewhere outside the name. The name will then be changed.
7.) Record the Volume's name on a sticker or a piece of paper and attach it to the drive so that it will
be easier to locate the correct drive in the future.
8.) Use the "Safely Remove Hardware" tool in the Task Bar before continuing with the next step.
9.) Disconnect the USB cable from the laptop or PC.
8-7-2-7 Connecting the External USB Hard Disk to the Vivid q N Scanner
1) Connect the USB cable to a USB port on the Vivid q N scanner.
2.) Turn ON power to the Vivid q N ultrasound scanner.
3.) Under My Computer (refer to
selection.
4) Proceed to perform the following functionality tests:
-
2
EVISION
"External USB Hard Disk Test" on page 4-27
Chapter 8 - Replacement Procedures
Figure 8-147 on page 8-138), verify that the drive appears for
V N S M
IVID Q ERVICE ANUAL
8-139