GE Vivid q N Service Manual page 606

GE
D FQ091019, R
IRECTION
8-5-1-1 Vivid q N Software Upgrade Overview
Before performing a Vivid q N Software Upgrade from Version BT11 to BT12, it is mandatory to backup
NOTICE
the Archive, then format and partition the Hard Disk (due to partitioning changes). Follow the
instructions as described in
NOTE: The PMC software is automatically updated with the system upgrade.
NOTE: The Vivid q N BT11 to BT12 upgrade software can only be purchased by the customer through
the Sales Dept, using the appropriate ordering number (HCat #), as listed in
Table 8-5
HCAT #
H45571ZT
NOTE: Following the software upgrade, an Application Specialist visit is recommended.
Until an Application Specialist has visited the site, it is recommended that only the factory
default presets be used.
NOTE: After performing an upgrade, all logs are deleted. It is recommended that these should be
recorded should they be needed in the future.
8-100
2
EVISION
8-5-1-1-1 "Preparation" on page
Software BT11 to BT12 Upgrade - Ordering Number
BT12 Upgrade
Section 8-5 - Software Loading
8-101.
Description
V N S M
IVID Q ERVICE ANUAL
Table 8-5.