GE
D
FQ091019, R
IRECTION
6.) Click Check to verify the connection.
3-10-3-6-1 Configuring the Repository Remote Path
NOTE:
It is possible to configure an additional user name and password for all remote paths. These
settings are only used if the system fails to log on the default user and password.
•
Under Configurable Remote Path User (refer to
password, as configured on the destination PC.
(This is the password usually assigned by the local IT person).
3-10-3-7
Save the New Settings
1.) Press SAVE SETTINGS to save the new settings.
.
Save settings
The new settings are saved to a common settings file. After a restart, the settings are also included
in other screens.
2.) Restart the Vivid q N system to activate the changes.
2
EVISION
Figure 3-104 Save New TCP/IP settings
Chapter 3 - System Setup
V
Figure
3-103), type the desired user name and
N S
M
IVID Q
ERVICE
ANUAL
3-101