GE Vivid q N Service Manual page 100

GE
D FQ091019, R
IRECTION
3-7-1-3 HP Officejet Pro 8000 Color Printer
NOTE: The HP8000 Color Printer is a Non-Medical device.
NOTE: The HP8000 Color Printer can be connected to the Vivid q N LAN only.
When using the USB connection, the printer should be connected through an isolated
transformer, since the Vivid q NUSB is not isolated.
NOTE: When powering the HP8000 Color Printer from the SafeLock Cart, the printer may be used via
a USB or LAN connection.
3-7-1-3-1 Connecting the HP Officejet Pro 8000 to the Vivid q N Scanner Mounted on the SafeLock Cart
NOTE: Follow the installation procedure for mounting the Vivid i/q system on the SafeLock cart, as
described in
NOTE: When using the Vivid i/q system mounted on the SafeLock cart, the HP Officejet Pro 8000
printer must be connected to the AC outlet at the rear of the SafeLock cart - see
1.) Connect the printer to the AC power outlet located at the rear of the SafeLock cart.
2.) Plug the SafeLock cart into the mains power supply.
3.) Using the USB communications cable, connect the HP Officejet Pro 8000 printer to the Vivid i/q
system.
USB Cable
Figure 3-20 AC Power Cable and USB Cable Connected to SafeLock Cart
4.) Proceed to perform the following functionality tests:
-
-
-
3-28
2
EVISION
Figure 3-19 HP Officejet Pro 8000 Color Printer
"Mounting the Vivid q N on the SafeLock Cart (optional)" on page
"SafeLock Cart - Grounding Continuity" on page 10-22
"SafeLock Cart - Chassis Current Leakage Test" on page 10-24
"Color Printer Test" on page 4-24
Section 3-7 - Completing the Hardware Installation
V N S M
IVID Q ERVICE
3-65.
Figure 3-20.
AC Power Cable
ANUAL