GE Vivid q N Service Manual page 558

GE
D FQ091019, R
IRECTION
5.) Using both hands, lift the Fan Assembly upwards from the front and then the rear to remove it from
the Bottom Assembly; lay it down adjacent to the system, ready for the next step as shown in
Figure 8-61
Figure 8-61 Removing the Fan Assembly
6.) Disconnect the Fan cable from the BEP and completely remove the Fan Assembly from the system,
as shown in
Figure 8-62 Disconnecting the Fan Cable from the BEP
8-52
2
EVISION
below.
Figure 8-62 below.
Section 8-3 - Internal Component Replacement Procedures
V N S M
IVID Q ERVICE ANUAL