GE Vivid q N Service Manual page 613

GE
D FQ091019, R
IRECTION
Table 8-6
Step
12. IMPORTANT.
Perform these steps before proceeding!
a.)Remove the USB Flash Drive from the USB port on
the rear panel.
b.)Check that no other media is connected to the system
(e.g. DVD drive).
c.)Press [OK] to continue.
2
EVISION
Step-by-Step Vivid q N Software Upgrade/Installation/Reinstallation Procedure
Instruction
Chapter 8 - Replacement Procedures
Expected Result
The system reboots and then begins the software installation process.
This stage of the process takes approximately 20 minutes, during which time a
progress indicator is displayed, as shown in the example below:
A series of progress bars, blank and additional screens are displayed, shown
in these examples:
V N S M
IVID Q ERVICE ANUAL
8-107