GE Vivid q N Service Manual page 175

GE
D FQ091019, R
IRECTION
The Local Area Connection Properties dialog box opens.
8.) Select Internet Protocol (TCP/IP).
9.) Click the Properties button.
The Internet Protocol (TCP/IP) Properties dialog box opens.
10.)Activate the Use the following IP address check box.
11.)Type in the Vivid q N IP address 10.0.0.1.
NOTE: The IP must be different from the IP address used for network computer.
12.)Type in the Subnet mask 255.255.255.0.
NOTE: The Subnet mask should be the same for both the network computer and the
Vivid q N.
13.)Click OK
14.)Press the Config button on the control panel to close all windows and return to the regular scanning
mode.
NOTE: The following steps are performed on the Network Computer.
1) On the network computer, access the Control Panel, as follows:
2
EVISION
Figure 3-106 Local Area Connection Properties
Figure 3-107 Internet Protocol (TCP/IP) Properties
Chapter 3 - System Setup
V N S M
IVID Q ERVICE ANUAL
3-103