GE Vivid q N Service Manual page 138

GE
D FQ091019, R
IRECTION
3-8-1 Mounting the Vivid q N on the SafeLock Cart (cont'd)
2.) Push the scanner down and backwards, until it locks into place against the locking tooth.
An audible click will be heard as the scanner locks into position. There will now be a gap the width
of one finger between the SafeLock Cart arm rest and the front of the scanner.
3.) If necessary, perform the alignment procedure as described in
Locking Mechanism" on page
4.) Connect the LAN Cable from the cart to the LAN connector on the Vivid q N rear panel.
USB Port
5.) Connect the Docking Connector to the rear of the scanner, as shown below.
Figure 3-65 Connecting the Docking Connector to the Rear of Scanner
3-66 Section 3-8 - Mounting the Vivid q N on the SafeLock Cart (optional)
2
EVISION
Figure 3-63 Vivid q N Scanner Mounted on SafeLock Cart
Docking Connector
Figure 3-64 Vivid q N Rear Panel
3-68.
V N S
IVID Q
3-8-2 "Adjusting the SafeLock Cart
Docking Connector
M
ERVICE ANUAL
LAN Connector