GE Vivid q N Service Manual page 279

GE
D FQ091019, R
IRECTION
4-3-2-4 Wireless USB Network Test
NOTE: When the Wireless Network USB Adaptor is installed in a new system, the functionality is verified as
described in
NOTE: When the Wireless Network USB Adaptor is installed in a system that is already configured, proceed as
described below.
4-3-2-4-1 Wireless USB Network Functionality Test
1.) With the system up and running, press Config.
2.) Click Connectivity and select Dataflow - see
Figure 4-7 Dataflow showing "Remote Database" as the Selected Device
3.) From the Dataflow Name field scroll-down list
with in day-to-day operations.
4.) Under Selected devices
5.) Click Check.
The Information - Check Status box opens -
2
EVISION
"Configuring the Wireless Adaptor" on page
(Figure
Chapter 4 - General Procedures and Functional Checks
3-93.
Figure 4-7.
(Figure 4-7), select a dataflow that the user works
4-7), select the appropriate device.
Figure 4-8.
V N S M
IVID Q ERVICE ANUAL
4-25