Select The Well Shape Of The Microplate Type - Molecular Devices MultiWash+ User Manual

Select the Well Shape of the Microplate Type

Different options are available for round-bottom and flat-bottom microplates. To define a
round-bottom microplate type, see
Figure 7-26: The Well Shape prompt
Table 7-21: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
Defining a Round-Bottom Microplate Type on page
Action
Press this button to return to the previous step. See
Microplate Type on page
Press this button to end the process and return to Define Plate without saving any
changes. See Defining a Microplate Type on page
Press this button to display either Flat or Round. To define a flat-bottom microplate
type, select Flat.
Press this button to display either Flat or Round. To define a flat-bottom microplate
type, select Flat.
Press this button to confirm the well shape and then define the whether to use
crosswise aspiration for the microplate type. See
Aspiration on page 100.
Chapter 7: Defining a Microplate Type
98.
77.
Select Whether to Use Crosswise
Select the Format of the
80.
99