Molecular Devices MultiWash+ User Manual page 118

MicroWash+ Microplate Washer User Guide
Selecting the Display of the Liquid Level Warning
Before starting a wash procedure or rinse process, the software can display a message for
the operator to make sure that the required wash or rinse bottles contain enough liquid for
the procedure or process.
Figure 8-10: The Liquid Warning option
Table 8-5: Actions of Control Panel Buttons
Button
On the left
On the right
118
Action
Press this button to return to Wash3 Empty Detection. See
Detection Options on page
Press this button to return to Setup. See
113.
Press this button to display either On or Off.
Press this button to display either On or Off.
Press this button to confirm the selection and then set the waste warning message.
See Selecting the Display of the Waste Level Warning on page
117.
Selecting Instrument Set Up Options on page
Scrolling Through the
119.
5032022 C