Confirm Or Change The Name Of The Cycle - Molecular Devices MultiWash+ User Manual

Confirm or Change the Name of the Cycle

A name is displayed for the cycle. You can either confirm the displayed name or give the cycle
a new name.
Figure 6-2: The Name prompt
Table 6-2: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
Action
Press this button to end the process and return to Define Cycle without saving any
changes. See Defining a Wash or Rinse Cycle on page
Press this button to edit the name of the cycle. See
page 68.
The button has no function for this option.
The button has no function for this option.
Press this button to confirm the name as it is displayed and then define the aspiration
duration for the cycle. See
69.
Chapter 6: Defining a Wash or Rinse Cycle
Edit the Name of the Cycle on
Select the Duration of the Aspiration for the Cycle on page
65.
67