Molecular Devices MultiWash+ User Manual page 79

For flat-bottom microplates, you can define the outside edges of the well for crosswise
aspiration.
Table 7-3: Flat-Bottom Microplate
Item
1
2
3
4
Note: Crosswise aspiration is available only for flat-bottom microplates.
To define a flat-bottom microplate type, see
95.
5032022 C
Description
Dispense needle
Aspiration needle
Vertical "zero" point for setting the vertical position of the manifold.
Horizontal "zero" point for setting the horizontal position of the microplate.
Chapter 7: Defining a Microplate Type
Defining a Flat-Bottom Microplate Type on page
79