Molecular Devices MultiWash+ User Manual page 57

Add More Cycles to the Procedure
The procedure definition can have up to eight cycles. When you have finished adding cycles,
select - - - as the name of the next cycle to stop adding cycles to the procedure definition.
Figure 5-7: The Cycle2 prompt
Table 5-6: Actions of Control Panel Buttons
Button
On the left
On the right
5032022 C
Action
Press this button to return to the previous step. See
Procedure on page 56.
Press this button to end the process and return to Define Procedure without saving
any changes. See Defining a Procedure on page
Press this button to scroll forward through the list of previously defined cycles. When
you have finished adding cycles, select - - - to stop adding cycles to the procedure
definition.
Press this button to scroll backward through the list of previously defined cycles.
When you have finished adding cycles, select - - - to stop adding cycles to the
procedure definition.
Press this button to confirm the cycle selection and then select the next cycle to use
with the procedure. If you selected - - - , then you can define the duration of the final
aspiration. See Select the Duration of the Final Aspiration for the Procedure on page
58
Chapter 5: Defining a Procedure
Select the Cycles for the
51.
57