Molecular Devices MultiWash+ User Manual page 120

MicroWash+ Microplate Washer User Guide
Selecting the Display of the Microplate Warning
Before starting a wash procedure or rinse process, the software can display a message for
the operator to make sure that a microplate is loaded in the microplate carrier.
Figure 8-12: The Plate Warning option
Table 8-7: Actions of Control Panel Buttons
Button
On the left
On the right
120
Action
Press this button to return to Waste Warning. See
Level Warning on page 119.
Press this button to return to Setup. See
page 113.
Press this button to display either On or Off.
Press this button to display either On or Off.
Press this button to confirm the selection and then set the key click option. See
Selecting the Key Click Option on page
Selecting the Display of the Waste
Selecting Instrument Set Up Options on
121.
5032022 C