Select The Processing Mode For The Procedure - Molecular Devices MultiWash+ User Manual

MicroWash+ Microplate Washer User Guide

Select the Processing Mode for the Procedure

Define the processing mode for the procedure as either Plate or Strip.
Figure 5-10: The Processing Mode prompt
Table 5-9: Actions of Control Panel Buttons
Button
On the left
On the right
60
Action
Press this button to return to the previous step. See
Aspiration for the Procedure on page
Press this button to end the process and return to Define Procedure without saving
any changes. See Defining a Procedure on page
Press this button to display either Plate or Strip.
Press this button to display either Plate or Strip.
Press this button to select the displayed mode and then select a previously defined
microplate type to use with the procedure. See
Procedure on page 61.
Select the Speed of the Final
59.
51.
Select the Microplate Type for the
5032022 C